Wen 3720

Model # 3720
10˝ JOBSITE TABLE SAW
bit.ly/wenvideo
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)

Wen 3720 Specifications

General

Brand	Wen
Model	3720
Category	Saw
Language	English

Summary

Technical Data Specifications

General Safety Rules

General Safety Instructions

Provides fundamental safety guidelines for operating power tools, emphasizing user awareness and preparation.

Specific Safety Rules for Table Saws

Table Saw Specific Safety

Details safety precautions unique to table saw operation, covering blade guards, kickbacks, and body positioning.

Electrical Information and Guidelines

Extension Cord Guidelines

Assembly and Adjustments

Folding Stand Assembly

Step-by-step instructions for assembling the folding stand for the jobsite table saw.

Aligning the Riving Knife

Rip Fence Mounting and Adjustment

Explains how to install and adjust the rip fence for accurate parallel cuts.

Installing and Changing the Blade

Step-by-step guide on how to safely install or change the saw blade.

Mounting Jobsite Saw on Folding Stand

Instructions on how to securely mount the jobsite table saw onto its assembled folding stand.

Adjusting the Riving Knife

Guides the user on how to adjust the riving knife to its correct position for different types of cuts.

Mounting the Blade Guard

Instructions for correctly installing the blade guard assembly onto the saw.

Kickback Risk Reduction

Offers advice on ensuring the rip fence is parallel to the blade to minimize kickback hazards.

Adjusting the Blade Height

Mounting Anti-Kickback Fingers

Miter Gauge Mounting and Adjustment

Details the procedure for installing and adjusting the miter gauge for precise crosscuts.

Adjusting the Blade Angle

Blade Parallelism to T-Slot

Operation Procedures

Pre-Operation Safety Precautions

Crucial safety advice to follow before starting any operation with the table saw.

Cross Cutting Procedure

Using a Dado Blade Set

Ripping Procedure

Non-Through Cut Procedure

Maintenance and Care

General Maintenance Safety Warnings