WARNING - to prevent accidental starting that could cause possible serious personal
injury; assemble all parts to your saw before connecting it to power supply. Saw
should never be connected to power supply when you are assembling parts, making
adjustments, installing or removing blades, or when not in use.
WARNING - if any parts are missing, do not operate this tool until the missing parts
are replaced. Failure to do so could result in possible serious personal injury.
Do not discard the packing materials until you have carefully inspected the saw, identified all
parts, and satisfactorily operated your new saw.
NOTE: if any parts are damaged or missing, do not attempt to plug in the power cord and turn
the switch on until the damaged or missing parts are obtained and are installed correctly.
To Next Page
Loading...
Need help?
General
