SECTION PAGE
Specifications………………………………………………………………… 4
Rules for safe operation……………………………………………………… 5
General instructions for all power tools……………………………………… 6
Extension cords………………………………………………………………. 12
Grounding instructions……………………………………………………….. 13
Unpacking……………………………………………………………………. 14
Assembly……………………………………………………………………... 15
To mount table saw on a work bench………………………………… 15
To assemble the leg stand……………………………………………. 15
To mount the leg stand on table saw base……………………………. 16
To install the handwheel……………………………………………… 16
To assemble the blade guard…………………………………………. 16
Operating instructions………………………………………………………… 17
Table saw adjustments………………………………………………... 17
Blade depth and angle adjustments…………………………………... 17
45º and 90º positive stop adjustment…………………………………. 18
Aligning and adjusting the rip fence…………………………………. 18
Adjusting table insert…………………………………………………. 19
Miter gauge operation and adjustment……………………………….. 19
Adjusting blade parallel to miter gauge slots………………………… 19
Installing/Replacing saw blade………………………………………. 20
Workpiece and work area set up……………………………………… 21
Operating……………………………………………………………… 21
Avoiding kickback…………………………………………………….. 22
Making a cross-cut…………………………………………………….. 22
Making a rip-cut……………………………………………………….. 23
Making a bevel rip-cut………………………………………………… 24
Maintenance and servicing…………………………………………………….. 25
Exploded view and parts list…………………………………………………… 26
Warranty statement…………………………………………………………….. 29
To Next Page
Loading...
Need help?
General
