• Stay alert and exercise control. Watch what you are doing and use common sense. DO NOT
operate tool when you are tired. DO NOT RUSH!
• Make sure work area has ample lighting to see the work and that no obstructions will
interfere with safe operation before performing any work by using your saw.
• Save these instructions. Refer to them frequently and use them to instruct other users. If you
loan someone this tool, loan them these instructions also.
• Use the proper extension cord. Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line voltage resulting in loss of power
and overheating. A wire gauge size (A .W .G.) of at least 16 is recommended for an
extension cord 25 feet or less in length. If in doubt, use the next heavier gauge. The smaller
the gauge number is, the heavier the cord is.
• Don’t abuse cord. Never carry tool by the cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
To Next Page
Loading...
Need help?
General
