Air Cleaner Maintenance
Routine maintenance of the air cleaner helps maintain proper air flow to the carburetor. Check that
the air cleaner is free of excessive dirt.
1. Unscrew the air cleaner cover (see figure 15).
2. Remove the sponge-like element from the casing.
3. Wipe the dirt from inside the empty air cleaner casing
4. Wash the sponge-like element in household detergent and warm water. Allow to dry.
5. Reinstall the sponge-like element in the air cleaner casing and reinstall the cover.
Air Cleaner
Cover
Figure 15- Removing the air cleaner casing.
Fuel Filter Cup Cleaning
The fuel filter cup is a small well underneath the fuel valve. It helps to trap dirt and water that may
be in the fuel tank before it can enter the engine. To clean the fuel filter cup:
1. Turn the fuel valve to the “off” position.
2. Unscrew the fuel filter cup from the fuel valve using a wrench. Turn the valve toward you
to unscrew (see figure 16).
3. Clean the cup of all sediment using a rag or brush.
4. Reinstall the fuel filter cup.
Figure 16- Removing the Fuel Filter Cup
22
To Next Page
Loading...
Need help?
General
