UNPACKING & PACKING LIST
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the Bench Grinder from the packaging. Make sure to
take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing
list below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact
our customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
PACKING LIST
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
Accessories
Components
Bench Grinder
Tool Rest Support
Lock Knobs
Right Tool Rest
Support
Left Tool Rest
Support
Right Tool Rest
Left Tool Rest
Drill Bit
Sharpening Rest
Left Spark Arrestor
Right Spark Arrestor
Wheel Dresser
Right Eye Guard
Left Eye Guard
Eye Shield Knobs
Hardware
1. M5x10 Screw Assemblies ...................................4
2. M6x12 Square Neck Bolts ...................................2
3. D6 Flat Washers ..................................................4
9
Wire Wheel Spacer
To Next Page
Loading...
Need help?
General
