STOPPING YOUR GENERATOR
SHUTTING OFF THE GENERATOR
1. Turn off all electrical devices and then unplug the devices from the generator.
CAUTION! Unplugging running devices can cause damage to the generator. Never stop the engine with elec-
trical devices connected and running.
2. Allow generator to run at no load for a few minutes to stabilize
internal temperatures.
3. Turn the 4-in-1 switch (Fig. 13 - 1) to the “FUEL OFF” position.
4. The engine will continue to run until the majority of the fuel in the
carburetor is consumed, which takes a few minutes. It will then shut
off automatically. This feature helps to prevent the carburetor from
being clogged by stale fuel, extending your generator’s lifespan.
5. In case you are in a hurry and do not want to wait for the generator
to automatically shut down, turn the 4-in-1 switch to the “ENGINE
OFF” position and the generator will shut off right away. However,
this method will leave stagnant fuel in the carburetor, possibly caus-
ing blockages, a shortened lifespan, and other maintenance issues. If
this approach is frequently taken, make sure to drain your carburetor
before any long storage periods.
WARNING! Allow the generator to cool for several minutes
before touching areas that become hot during use.
CAUTION! Allowing gasoline to sit in the fuel tank for long
periods of time can make it difficult to start the generator in the fu-
ture. Never store the generator for extended periods of time (over
2 months) with fuel in the fuel tank. Refer to “Storing the Genera-
tor” on page 28.
23
1
Fig. 13
To Next Page
Loading...
Need help?
General
