Wen 56352

34 pages

To Next Page

To Next Page

Loading...

Model # 56352

3500W PORTABLE

GENERATOR

bit.ly/WENvideo

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,

ease of operation, and operator safety. When properly cared for, this product will supply you years

of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,

and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,

reliable service.

IMPORTANT:

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

techsupport@wenproducts.com

WENPRODUCTS.COM

(M-F 8AM-5PM CST)

Questions and Answers:

H
Henry BowenAug 3, 2025
Why won't my Wen Portable Generator start?
- J
  johnsonjasonAug 3, 2025
  Your Wen Portable Generator might not start due to several reasons. First, ensure the engine switch is set to the “ON” position. Also, check that the fuel valve is turned to “ON”. If these aren't the issue, make sure the choke is closed and that the engine has enough gasoline, which isn't contaminated or old. A dirty or broken spark plug could also be the culprit, so clean or replace it. Finally, ensure the generator is on a level surface and that the oil level is sufficient; add or replace oil if needed.
R
Richard NobleAug 14, 2025
What to do if my Wen 56352 runs but doesn't support all connected devices?
- A
  Albert HaleAug 14, 2025
  If your Wen Portable Generator runs but cannot support all connected electrical devices, it might be overloaded. Here's what to do: 1. Turn off all electrical devices. 2. Unplug all electrical devices. 3. Turn off the generator. 4. Wait several minutes. 5. Restart the generator. 6. Try connecting fewer electrical loads to the generator. Also, check for any faulty or short-circuited electrical loads and disconnect them. Ensure that the air cleaner is not dirty; clean or replace it if necessary.
C
Cathy TerrellAug 22, 2025
How to fix a Wen 56352 Portable Generator that runs but has no electrical output?
- A
  April YoungAug 22, 2025
  If your Wen Portable Generator runs but provides no electrical output, check the circuit reset button. Wait for 2 minutes, then push the circuit reset button to the “ON” position. If you're using an extension cord, try a different one. Also, test with a different electrical device to rule out a bad connection to the generator.

Wen 56352 Specifications

General

Brand	Wen
Model	56352
Category	Portable Generator
Language	English

Summary

Safety Information and Warnings

General Safety Alerts

Critical warnings regarding carbon monoxide, exhaust fumes, and flammable vapors.

Generator Safety Rules

Essential rules for safe operation, including electrical connections and refueling.

Generator Preparation Steps

Add Engine Oil

Add Gasoline

Ground the Generator

Method for properly grounding the generator for electrical safety.

Generator Maintenance Procedures

Routine Maintenance Schedule

Overview of recommended maintenance checks and their frequency.

Checking Engine Oil Level

Procedure for checking the generator's engine oil level.

Changing and Draining Engine Oil

Instructions for draining and refilling the engine oil.

Air Cleaner Maintenance

Spark Plug Maintenance

Troubleshooting Common Issues

Engine Not Starting

Causes and solutions for when the engine fails to start.

No Electrical Output

Overloaded Generator

Related product manuals

Preview: Wen 56380i

Preview: Wen 56360i

Preview: Wen 56310i

Preview: Wen 56360iX

Preview: Wen 56475

Preview: Wen 56225i

Preview: Wen 56235i

Preview: Wen 56477i

Preview: Wen 56450i

Preview: Wen 56455i

Preview: Wen 56400M

Preview: Wen 56235iX