9
UNPACKING & PACKING LIST
Components Spark Plug Wrench
Wrench (1) Handle (1)
Generator (1)
High Altitude Kits
3000 - 6000 ft High Altitude Kit (1) 6000 - 8000 ft High Altitude Kit (1)
Fuel Cup Seal (1)
Bolt Seal (1)
Main Jet (1)
Fuel Cup Seal (1)
Bolt Seal (1)
Main Jet (1)
Tools
Wrench
8mm/10mm (1)
Funnel
(1)
PACKING LIST
REMOVING THE SHIPPING BRACKETS
Your generator comes with two shipping brackets that pro-
tect the generator during delivery. These brackets should be
removed before using the generator. The shipping brackets
are located on the two lower beams of the generator (Fig.
1). Use the included 8mm/10mm wrench to remove the
two bolts on each bracket, then slide the brackets off. You
will not need the bracket or bolts, please discard appropri-
ately.
Fig. 1
To Next Page
Loading...
