Name: Wen MM1011T
Brand: Wen
Rating: 5 (1 reviews)

Questions and Answers:

C
Christine ColemanJul 29, 2025
How to improve the cutting performance of my Wen MM1011T?
- R
  ramosraymondJul 29, 2025
  If your Wen Saw has ineffective cutting performance, start by sharpening or replacing the blade if it's dull. If the blade is dirty, remove it and clean the surface and cutting edge with steel wool and turpentine. Also, ensure the blade flanges are flush against the blade and the arbor bolt is tightened completely. Verify that you are using the correct blade for the workpiece material and thickness, and that the blade is installed in the correct orientation.
D
Dawn NavarroAug 4, 2025
What to do if my Wen MM1011T motor does not start?
- N
  Nathan ClarkAug 4, 2025
  If your Wen Saw motor won't start, first check the power cord, extension cord, power plug, and the power outlet for any damage or connection issues. Do not use the tool if any cord is damaged. Also, ensure that the outlet is functional and has the right capacity for the tool. If these steps don't solve the problem, it could be due to worn carbon brushes, which you may need to inspect and replace. However, a defective power switch, motor or other internal problem can also be the cause, in this case stop using the tool and call 1-800-232-1195 for customer service.
L
Logan JacobsAug 10, 2025
Why is my Wen Saw making excessive noise or vibration?
- N
  Nicholas Murphy MDAug 10, 2025
  If your Wen Saw is producing excessive noise or vibration, ensure it is securely mounted to a flat and level work surface. Also, check the blade. A damaged blade can cause these issues, so replace it if necessary. Make sure the blade flanges are flush against the blade and the arbor bolt is tightened completely.