"#$%!-!!
To start the machine:
1. Apply a slight downward pressure on the handle to alleviate some weight off
the diamonds ensuring the machine does not life off the ground; then gently
squeeze the activation lever (E) and press and release the START button (F).
2. Once the machine starts, gently release the downward pressure and start
grinding.
DO NOT lift the machine off the ground while starting it. Doing so could
cause the diamonds to release from the machine, resulting in damage to the floor
or personal injury.
The speed of the machine can be adjusted when the machine is running or
stopped. To adjust the speed, rotate the speed control knob (G) on the handle
clockwise to slow it down, or counterclockwise to speed it up. Always start the
machine at the lowest speed and adjust as necessary.
!
1. Release the activation lever.
When you unplug the machine, the screen will stay lit for a few seconds as the
VFD drains the power from its internal capacitors. This is normal.
!
!
!
!
NEVER open the VFD panel while plugged in or immediately after
unplugging the power cord. Severe injury or death may result.
!
!
!
!
!
!
!
!
!!!
!!!H;I4!J%:%4!
! ! ! ! ! ! ! ! ! ! ! ! !
!
!!!!!!
!
!
!
!
!
!
!
!
To Next Page
Loading...