"#$%!/!!
INTRODUCTION!!
Congratulations on your purchase of a WerkMaster machine. WerkMaster
machines allow professional surface prep, polishing, grinding, edging, buffing
and restoration of virtually any surface material, including concrete, terrazzo,
stone, and hardwood. This manual is provided to assist you in the operation and
maintenance of your WerkMaster.
!
MACHINE DESCRIPTIONS
WerkMaster machines include the Scarab, Termite XT, Viper XTi, Raptor XTi,
TITAN XT, and COLOSSOS XT models. To see the complete family of
WerkMaster machines visit our website at www.werkmaster.com.
!
!
Viper XTi
• Designed to meet the needs of contractors, facility services, equipment rentals
and DIYers
• 7 Machines in 1 – grinds, sands, strips, polishes, buffs, burnishes, and edges
• Remove thinset, epoxy, glue, paint and mastic, and similar materials
• Run wet or dry on concrete, stone, terrazzo, and vinyl flooring
• Premium hardwood sander, screener and edger
• Edge to within 1/8” (3 mm) of the wall
• Features WerkMaster Octi-DiscTM technology with 8 counter rotating heads
and the versatility of using our 5” (127mm) ULTRA-FLEX Plug ‘N Go tooling
system
• Ideal for garage floor restoration and for residential and small commercial
applications
• Variable frequency drive lets you run at speeds from 450 RPM to 1600 RPM
• Dual action wet/dry vacuum port allows for dry, dust-free pick up and can be
used with water feature
• Run 220V single-phase or 110V with Quick 220 Adapter
!
!
!
!
!
!
!
!
!
!
!
!
!
!
To Next Page
Loading...