How to fix Weslo Treadmill when the power does not turn on?
If your Weslo Treadmill isn't turning on, ensure the power cord is plugged into a properly earthed outlet, using a suitable extension cord if needed. Also, check that the key is fully inserted into the console. Finally, examine the circuit breaker on the treadmill frame near the power cord; if the switch protrudes, wait five minutes, then press it back in to reset it.
What to do if my Weslo Cadence 830 Treadmill power turns off during use?
If your Weslo Treadmill's power turns off during use, first, check the circuit breaker located on the treadmill frame near the power cord. If the circuit breaker has tripped, wait five minutes, then press the switch back in. Also, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Finally, remove and reinsert the key fully into the console. If the treadmill still won't run, further assistance is needed.
Why are the displays of the Weslo Cadence 830 console not working properly?
If the console displays on your Weslo Treadmill aren't functioning correctly, start by unplugging the power cord and checking the console batteries, replacing them if necessary. If that doesn't solve the issue, remove the hood and locate the Reed Switch and Magnet on the left side of the Pulley. Ensure there's about 3 mm between them, adjust the Reed Switch slightly, and retighten the screw. Re-attach the hood and test the treadmill.
General| Motor Power | 2.25 HP |
|---|---|
| Running Area | 16" x 50" |
| Maximum User Weight | 250 lbs |
| Display | LCD |
| Speed Range | 0-10 MPH |
| Programs | 6 |
| Folding | SpaceSaver Design |
| Motor | 2.25 HP |
| Weight Capacity | 250 lbs |
| Incline | 2-Position Adjustable Incline |
To Next Page
