Westcott FJ80 - FJ80 Powering On, Off, and Testing; Powering On and Off the FJ80

FJ80 Speedlight: Mounting
Attaching to a Camera
1. Ensure the FJ80 is OFF.
2. Slide the FJ80 Speedlight base into the camera’s hot shoe with the touchscreen facing the same
direction as the rear of the camera. (NOTE: Sony cameras REQUIRE the #4711 FJ-X2m Adapter for
Sony Cameras.)
3. Rotate the Shoe Lock lever clockwise (left to right) until it’s securely mounted to the camera.
Detaching from a Camera
1. Ensure the FJ80 is OFF.
2. Rotate the Shoe Lock lever counterclockwise (right to left). (NOTE: Ensure that the lever has been
completely moved to the left. Otherwise, the locking pin may be permanently damaged upon
removal of the speedlight.)
3. Securely grasp the sides of the FJ80 Speedlight, gently slide the speedlight towards the rear of
the camera, and completely remove it from the camera’s hot shoe.
Note: Never force or remove the FJ80 into or away from the camera’s hot shoe.
FJ80 Speedlight: Attaching & Removing Modifiers
Attaching the FJ80 Cold Shoe Stand
1. Slide the FJ80 Speedlight base into the cold shoe stand with the touchscreen facing the same
direction as the channel opening on the back of the shoe stand.
2. Rotate the Shoe Lock lever clockwise (left to right) until it’s securely mounted to the cold shoe
stand.
3. Remove the FJ80 Speedlight by rotating the Shoe Lock lever counterclockwise (right to left).
(NOTE: Ensure that the lever has been completely moved to the left. Otherwise, the locking pin
could be permanently damaged upon removal of the speedlight.)
4. Securely grasp the sides of the FJ80 Speedlight, gently slide the speedlight towards the rear of
the cold shoe stand and completely remove it from the cold shoe stand.
Attaching the FJ80 Magnetic Diffusion Dome [sold separately]
1. Ensure all modifiers have been removed from the FJ80’s articulating flash head.
2. Gently grasp the white dome, align the dome’s opening with the FJ80’s speedlight face, and
gently affix it into place using the magnets.
3. Remove the Magnetic Diffusion Dome by gently grasping the dome and pulling away from the
flash head.
10