30B THREE MARINE DIESEL SYSTEM SPECIFICATIONS
FUEL SYSTEM
General
Fuel
Injector Pump
Engine Timing
(spill timing)
Injector Pressure
Nozzle
Lift Pump
PN
037818
Air cleaner
Air Flow (engine combustion)
COOUNG
SYSTEM
General
Operating Temperature
Fresh Water Pump
PN
037015
Raw Water Pump
PN
033636
Raw Water Flow, at 3600 rpm
(measured before discharging
into exhaust elbow)
System Capacity (fresh water)
LUBRICATION SYSTEM
General
Open flow - totally self-bleeding, manual priming.
No.2
Diesel (cetane # 45
or
better).
In-line plunger type (Bosch type).
19°
±1°
BTDC
Static
1991
psi (140
kg/cm~
Throttle type.
12-volt
DC; lift capacity 5 ft (1.5
m)
Plastic screen type - cleanable.
60.4 cfm (1.7 cmm)
Fresh water-cooled block,
thermostatically-controlled
with heat exchanger.
170 - 190° F (77 -
88°
C)
Centrifugal type, metal impeller, belt-driven.
Positive displacement, rubber impeller,
mechanically-driven.
11.1
U.S.
gpm
(42 Ipm) approximate.
4 qts (3.8 liters)
Pressure type
by
Trochoid pump,
gear-driven, with external pressure relief valve.
13 Westerbeke Engines
To Next Page
Loading...
Need help?
General
