Western Digital My Cloud EX2 - Page 95

MANAGING STORAGE ON WD MY CLOUD EX2
90
WD MY CLOUD EX4 PERSONAL CLOUD STORAGE
USER MANUAL
Enabling / Disabling an iSCSI Target
Use the following steps to enable or disable an iSCSI target.
Enabling an iSCSI Target
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you’d like to enable.
3. Click Enable. The selected target is now enabled.
Disabling an iSCSI Target
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you’d like to disable.
3. Click Disable. The selected target is now disabled.
Modifying an iSCSI Target
Use the following steps to modify an iSCSI target.
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you’d like to modify.
3. Make all of your necessary changes, and then click Save.
Deleting an iSCSI Target
Use the following steps to delete an iSCSI target.
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next to the target you’d like to delete.
3. Ensure that this is the target you want to delete, and then click Delete. The selected
target is deleted and removed from the iSCSI Target list.
Enabling iSCSI iSNS Client
The Internet Storage Name Service (iSNS) protocol is used for interaction between iSNS
servers and iSNS clients. iSNS clients are computers, also known as initiators, that are
attempting to discover storage devices, also known as targets, on an Ethernet network. Use
the following steps to configure the iSCSI iSNS client.
1. On the navigation bar, click Storage to display the Storage screen.
2. If not already selected, click iSCSI.