Lit. No. 49513, Rev. 00 17 August 15, 2011
GETTING TO KNOW YOUR SNOWPLOW
UltraMount
®
SNOWPLOW
The UltraMount snowplow consists of all the components
that are readily removable from the vehicle as a unit.
This includes the blade, quadrant, lift frame, A-frame/
T-frame, hydraulic unit and the NIGHTHAWK™ snowplow
headlamps. The snowplow is ready and easy to mount
when you need to plow snow. When plowing is completed,
remove the snowplow.
UltraMount snowplows have through holes in
the lower lift frame and stand leg. The
holes will accept 1/2" trailer hitch pin
locks, which are available at most auto
supply or trailer equipment stores.
These holes, used with locks, may be
used to secure the snowplow assembly
on or off the truck to deter theft.
The snowplow shall be installed according
to instructions supplied. WESTERN
®
outlets
are trained to provide this service and other
services for this snowplow.
To Next Page
Loading...
