Lit. No. 49513, Rev. 00 90 August 15, 2011
MAINTENANCE
Drain
Cap
WIDE-OUT™ Blades
Fill
Plug
4. Turn the control OFF.
5. Remove the fi ll plug.
6. HTS™ Blades: Fill the reservoir to within
2-1/2" from the top of the fi ll hole and replace
the fi ll plug.
HTS Blades
Drain
Plug
Breather/Fill Plug
MVP PLUS™, WIDE-OUT™ and other
Straight Blades: Fill the reservoir to the top
of the fi ll hole and replace the fi ll plug.
For fl uid recommendations see the following
"Annual Fluid Change" section.
To Next Page
Loading...
