DISPLAY
Interface Path: HOME/MON. → [SYSTEM SETTING] → [DISPLAY]
Adjust the brightness of the display backlight, the shutdown time, and the lock screen time to adapt to
different environments and energy saving.
Parameter Value Setting:
Auto power off time, default off, 30 minutes, 40, 50, 60 minutes, off
Backlight time, default 30 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes,
never off.
Automatic lock screen time, default off, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10
minutes, off
25
SYSTEM SETTINGSYSTEM SETTING
Contrast: sharpness adjustment.
Backlight: brightness value.
Backlight time: system backlight time!
Automatic lock screen time: lock screen after
touching the screen without any operation.
Automatic shutdown time: transmitter shutdown
after no operation time
High brightness display will
increase the energy
consumption of the transmitter, which will
affect the working time of the transmitter.
Please pay attention to setting the transmitter
voltage alarm. Pay attention to the battery level
and avoid low battery.
To Next Page
Loading...