LOW BATTERY
Interface path: HOME/MON. → [SYSTEM SETTING] → [LOW BATTERY]
By setting the alarm trigger value, an alarm is given at low voltage. Avoid accidents caused by long-term
operation of the control system under low voltage conditions.
Click the “Transmitter"value box and click the parameter adjustment button according to factors such as
battery life and performance.
Transmitter, default 3.7V, range: 3.5-6V.
Parameters Setting (transmitter alarm value):
External voltage, default 0V, range: 0-36V.
*The above data defaults to lithium battery. For other battery types, please refer to the battery's
instruction manual.
Receiver, default 4.2V, range: 3.8-6.5V.
27
SYSTEM SETTING
Set battery voltage detection reference voltage
(beep-beep-beep)
Set battery voltage alarm value.(beep beep beep-beep
beep beep-beep beep beep- beep beep beep beep beep-
beep beep beep beep beep beep)
When the alarm sounds, please
pay attention to what type of
warning is displayed on the screen at the right time
ASAP to avoid running in an abnormal state for a
long time!
To Next Page
Loading...