THROTTLE HOLD
Mainly used in model debugging.Control the throttle at the lowest position through the switch to ensure
the safety of debugging.
Interface path: HOME/MON. → [MODEL MENU] → [THROTTLE HOLD]
The set throttle hold output position
Throttle current position, when
unlocked, the throttle channel can be
changed with the action. After locked,
fix it in the set lock position.
Range 0-100, default 0
setting response speed of
function switch of [Throttle
hold], no conflict with the delay
of [Condition].
Put the stick on the throttle
position you want to hold,
press the left and right keys to
adjust the value, or press the
confirm key to get the throttle
position when the value is
selected.
Range 0%-50%, default 17%
Function control switch,
default [--]
60
MODEL MENU \ HELICOPTER
To Next Page
Loading...