Step 1. Align the headlight base hole, the front fender screw hole with the front fork screw hole.
Step 2. Fix the three parts above with the front fender screw, then tighten the screw with a wrench and adjust
the height of the headlight and fender at the same time, the front fender installation is completed.
Step 3. Align the rear fender screw hole and the rear fork screw hole.
Step 4. Fix the two parts above with the rear fender screw, then tighten the screw with a wrench and adjust the
height of the rear fender at the same time, the rear fender installation is completed.
WHEELSPEED ARIES 27.5" E-Bike 10
2.6 Installing the front and rear fenders
To Next Page
Loading...