WHEELSPEED ARIES 27.5" E-Bike 12
Step 3. Reinstall the battery, please put the battery on the battery base, and insert the key into
the keyhole, then rotating the key to the lock icon around the key hole.
NOTE: To use the throttle, please turn on the battery power.
NOTE:
Safety tips for charging your battery:
DO NOT charge the battery in the following cases:
• Fully charge the battery before your first use, this may take up to 6 hours.
• To maximize the life of the battery, you must charge it after each riding session.
• When not in active use, please charge at least once a month to maintain optimal battery levels.
• Perform periodic visual inspection of the battery ports and charging cables.
• When the battery is fully charged, please STOP CHARGING and unplug the unit.
• Keep your charging environment clean and dry at all times.
• If the charging port is damp or has any liquid on it, do not charge your E-Bike.
• In order for the battery to operate at maximum efficiency, avoid charging your E-Bike in extremely
hot or extremely cold environments.
• Use only the battery and charging cable provided to you by WHEELSPEED, use of third party products
may compromise the battery and damage the E-Bike. If a replacement is needed, please
contact WHEELSPEED directly.
• There is excessive odor or heat.
• Leakage or physical damage.
Please keep your keys in case they are lost, it is recommended that you keep a key in
your home for backup.
To Next Page
Loading...