EasyManua.ls Logo

Whirlpool CATALYST - Water Level Selection; Wash;Rinse Temperature Control; Automatic Temperature Control (AccuWash); Adjustable Cycle Signal

Whirlpool CATALYST
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
AUTOMATIC TEMPERATURE CONTROL, (ACCUWASH)
AUTOMATIC TEMPERATURE CONTROL (ATC) electronically senses and maintains a uniform
water temperature by regulating incoming hot and cold water.
Even in cold wash, some hot water is introduced into the washer to maintain a temperature of
approximately 75°F (24°C).
Warm wash is regulated at approximately 100°F (32°C).
Warm rinse is regulated at approximately 75°F (24°C), whether AccuWash is selected or not.
The second fill in the PERMANENT PRESS Cycle is for cooling the load and uses unregulated
cold water.
ADJUSTABLE CYCLE SIGNAL
A tone will sound at the end of the wash cycle.
The sound level of this tone can be adjusted from
LOUD to OFF by pressing the SIGNAL keypad.
SELECTING WATER TEMPERATURE
Wash Water
Temperature
HOT
111°F (44°C)
or above
WARM
90° - 110°F
(32° - 43°C)
COLD*
70° - 90°F
(21° - 32°C)
Suggested Fabrics
Work clothes
Sturdy whites/
colorfast pastels
Diapers
Dark/non-colorfast colors
Permanent press items
Nylon, polyester, acrylics
silk, woolens
Knits/delicate
Extra-sensitive colors
Non-colorfast items
Handwashables
Comments
Best cleaning for heavily soiled items
Removes oils, perspiration, greasy soils
and stains
Reverts graying or yellowing
Best for moderately soiled to lightly soiled items
Safe for most fabrics
Less fading and dye bleeding
Reduces wrinkling
Best for very lightly soiled items
Saves hot water
* In wash water
temperatures colder
than 70°F (21°C),
detergents do not
dissolve well and soils
may be difficult to
remove. Some fabrics
may retain wear
wrinkles and have
increased pilling - the
formation of small lint-
like balls on the surface
of the garment. Pilling
is the natural result of
wearing and washing
of a garment.
WATER LEVEL
Up to five (5) different water levels can be selected ranging from SMALL LOAD to LARGE LOAD. In
most cycles, reducing the water level will result in the motor operating at a slower agitation speed. See
chart on page 9.
WASH/RINSE TEMP CONTROL
This allows the selection of four (4) different wash and rinse water temperature combinations based on
the type of load being washed.

Table of Contents

Other manuals for Whirlpool CATALYST

Related product manuals