EN
17
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
Important: Do not transport the washing machine without
having fixed the transport bolts .
1. Pull out the mains plug, and close the water tap.
2. Make sure that door and detergent dispenser are properly
closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
water from the hoses, and fix them so that they cannot
get damaged during transport.
4. Refit the transport bolts. Follow the instructions for removing
the transport bolts in the “Installation Guide” in reverse
order.
User manual
To Next Page