Care and
Maintenance
1. Internal Drying
3. Water Tank
4. Main Body
• Boiling water, eradicator, acid or alkaline detergent, soap, abrasive powder, gasoline, thinner,
alcohol, benzene organic solution and brush are not allowed to use for cleaning
• Do not rinse clean with water spray
CAUTION
1. When POWER OFF, the Fan will continue to operate for 10 seconds at high fan speed to
dry out the internal moisture for
anti-mildew purpose. At this moment, the
light"DEFORST" will light up. That's mean the internal drying function is in progress.
It is recommended to clean the main body regularly.
1. Unplug the power plug before cleaning.
2. Use wet soft cloth or mild detergent to wipe the unit and followed by a dry cloth.
3. If the machine will not be used for a long time, it is recommended to unplug, clean and
wrap the machine and store in a dry place without sunlight.
Except the filter and All-in-one Multi-Protection filter, heavy dust may also
trapped around the rear panel. It is suggested to clean the rear panel bi-weekly.
1.Take off the filter cover and vacuum the rear panel gently to remove heavy dust.
1. After each use of dehumidpurifier, empty the water tank.
2. Remove the water tank lid and dry the water
tank by using a soft cloth
3. Return the water tank lid and place the water
tank back to the machine.
2.
Water tank lid
2. Rear Panel (Pre-filter)
To Next Page
Loading...
