Whirlpool FWG71283W - Cleaning and Maintenance; Exterior Cleaning and Hose Check

EN
13
User manual
CLEANING THE OUTSIDE OF THE WASHING MACHINE
CHECKING THE WATER SUPPLY HOSE
Use a soft damp cloth to clean the outer parts of the washing
machine.
If the inlet hose has a transparent coating, periodically check
if the colour intensies locally. If yes, the hose may have a leak
and should be replaced.
Check the inlet hose regularly for brittleness and cracks. If
damaged, replace it by a new hose available through our
After-Sales Service or your specialist dealer.
Depending on the hose type:
For any cleaning and maintenance, switch o and unplug the washing machine.
Do not use ammable uids to clean the washing machine.
Do not use glass or general purpose cleaners, scouring powder
or similar to clean the control panel - these substances might
damage the printing.
For water stop hoses: check the small safety valve inspection
window (see arrow). If it is red, the water stop function was
triggered, and the hose must be replaced by a new one.
For unscrewing this hose, press the release button (if
available) while unscrewing the hose.
CLEANING & MAINTENANCE