Whirlpool KRMF606ESS - Page 35

COMPONENT ACCESS
Multi-Door Freestanding Refrigerator
n
4-7
Accessing Refrigerator Compartment Components (Continued)

13. Remove three, 1/4" (6.4 mm) hex head screws.
14. Disconnect ice maker ll tube from the isolaon valve
connected to the lter head.
15. Disconnect electrical connecons to water reservoir and
valve assembly. Disconnect dispenser and ice maker ll tubes.
16. Drop the front of the housing and disengage the 3 rear tabs
from the three slots in the top of the refrigerator cabinet.
17. Disconnect 1/4" (6.4 mm) reservoir water tube from dual
water valve and cut the ve nylon wire es to remove
reservoir.
NOTE: Reservoir wire es do not need to be removed to
access remaining water reservoir and valve assembly
components.
18. Li dual water valve to remove.
A. Dispenserlltube
B. IceMakerlltube
A
B
A
A
A
A
C
D
B
A
A. Wirees
B. Reservoir
C. 1/4" (6.4 mm) reservoir water tube
D. Dual water valve