Need help?Do you have a question about the Whirlpool WFW5090GW and is the answer not in the manual?
General| Style | front load |
|---|---|
| Color | white |
| Washer Capacity | 2.3 cubic feet |
| Max Spin Speed | 5 revolutions per minute |
| Spin Speeds | 5 |
| Number of Cycles | 8 |
| Cycle Selections | clean washer, heavy duty, synthetics, delicates, wool, quick wash, hand wash, rinse and spin |
| Options | delay wash, colors, tumblefresh, cold water prewash for stains |
| Noise level | no |
| Temperature Settings | 6 |
| Temperature Selections | extra hot, hot, warm, cool, cold, colors |
| Soil Levels | normal, heavy |
| Internal Heater | yes |
| Delay Start / End | yes |
| Child Lock | no |
| Interior Light | no |
| Steam | no |
| Smart Home | no |
| Annual Energy Consumption | 51 kilowatt hours |
| Voltage | 120 volts |
Weight and Dimensions| Depth | 25.13 inches |
|---|---|
| Height | 33.25 inches |
| Width | 24 inches |
Details safety alerts, DANGER/WARNING messages, and precautions.
Explains control panel layout, buttons, cycles, and options.
Procedure to manually unlock the washer door in case of power failure.
Information on activating and using the service diagnostic mode.
Step-by-step instructions for entering service diagnostic mode.
Guide to running the service test cycle for diagnostics.
Chart detailing steps, icons, descriptions, and checks in the service test cycle.
Explanation of fault/error codes displayed by the washer.
Guide to diagnosing and resolving common washer problems.
Essential safety precautions for performing component tests.
Diagram showing electrical connections and component layout.
General procedures and checks before testing washer components.
Procedure to check power supply to the Appliance Control Unit (ACU).
Testing the User Interface (UI) for functionality and errors.
Checks for the motor, ACU, and wiring connections.
To Next Page