To Next PageTo Next PageWhy does my Whirlpool Dehumidifier run too much?
If your Whirlpool Dehumidifier runs excessively, it might be due to the area being too large for the unit's capacity. Alternatively, open doors and windows can increase the workload. Ensure all doors and windows are closed to the outside.
Why does frost appear on the coils of my Whirlpool WHAD703AW Dehumidifier?
If you notice frost on the coils of your Whirlpool Dehumidifier, especially soon after turning it on or if the room temperature is below 41°F (5°C), this is usually normal. The frost should disappear within approximately 60 minutes.
What to do if my Whirlpool Dehumidifier will not start?
If your Whirlpool Dehumidifier doesn't start, first ensure it's plugged into a grounded 3-prong outlet. Check your house's fuse or circuit breaker and replace the fuse or reset the breaker if needed. If there was a power failure, the unit will restart automatically after a 3-minute delay. Also, the dehumidifier turns off automatically if it has reached the set humidity level or if the bucket is full, so you may need to adjust the humidity level or empty the water bucket. Finally, make sure the bucket is securely seated in its proper position.
General| Type | Dehumidifier |
|---|---|
| Moisture Removal Capacity | 70 pints per day |
| Energy Star Certified | Yes |
| Noise Level | 51 dB |
| Filter Type | Washable |
| Continuous Drain Option | Yes |
| Control Type | Electronic |
| Display Type | Digital |
| Drainage Option | Manual or Continuous |
| Automatic Defrost | Yes |
| Automatic Shut Off | Yes |
| Auto Restart | Yes |
| Coverage Area | 1400 sq ft |
| Operating Temperature | 41°F to 89°F |
Key safety precautions to reduce the risk of fire, electric shock, injury, or sickness when using the dehumidifier.
Details on voltage, amperage, fuse/breaker requirements, and circuit usage for the dehumidifier.
Instructions for proper grounding of the dehumidifier to prevent electrical shock hazards.
Steps for safely removing packaging and cleaning residue from the dehumidifier before operation.
Recommendations for positioning the dehumidifier for optimal performance and safety, including clearance and temperature.
Reinforces the importance of connecting the dehumidifier to a grounded 3-prong outlet.
How to power the dehumidifier on and off, including important operational notes.
Instructions for cleaning the removable air filter to maintain optimal efficiency and air quality.
Diagnosing and resolving issues where the dehumidifier fails to power on.
Troubleshooting why the dehumidifier is not effectively removing moisture from the air.
Interpreting and addressing specific error codes displayed by the dehumidifier.
