How to install, operate
and maintain your
E-Z Touch Demand
Controlled Water Softener
Model WHES48
System tested and certified by NSF International
against NSF/ANSI Standard 44
for hardness reduction and efficiency.
System tested and certified by the Water Quality
Association against CSA B483.1.
Do not return water softener to store
7310359 (Rev K 9/9/11)
Product No. W10270201
Manufactured and warranted by
Ecodyne Water Systems
1890 Woodlane Drive
Woodbury, MN 55125
Installation and Operation Manual
Printed on recycled paper
If you have any questions or concerns when
installing, operating or maintaining your water
softener, call our toll free number:
1-866-986-3223
Monday- Friday, 8 AM - 7 PM EST or visit
www.ecodynewatertreatment.com
When you call, please be prepared to provide
the model, date code and serial number of your
product, found on the rating decal, typically
located on the rim below the salt lid hinges.
To Next Page
Need help?
General
