EasyManua.ls Logo

White Rodgers 1F82-0261 - User Manual

White Rodgers 1F82-0261
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Blue 2” Heat Pump Thermostat
Heat Pump Installation and Operating Instructions
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
APPLICATIONS
1F82-0261 Thermostat
Model Programming Choices
1F82-0261
5/1/1 Day Programmable
SPECIFICATIONS
Electrical Rating:
Battery Power or Hardwire ............................. 20 VAC, 50/60 Hz
Terminal Load ........................................................ 1.0 A per terminal, 1.5A maximum all terminals combined
Setpoint Range ...................................................... 45° to 90°F (7° to 32°C)
Differential (Heat Pump) ........................................ Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient ................................................. 32° to +105°F (0° to +41°C)
Operating Humidity ................................................ 90% non-condensing max.
Shipping Temperature Range ................................ -40° to +150°F (-40° to +65°C)
Dimensions Thermostat ......................................... 3-3/4”H x 4-3/4”W x 1-1/2”D
PRECAUTIONS
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
Do not use on circuits exceeding specified voltage.
Higher voltage will damage control and could cause
shock or fire hazard.
Thermostat installation and all components of the
system shall conform to Class II (current limited)
circuits per the NEC code. Failure to do so could cause
a fire hazard.
WARNING
!
PART NO. 37-7022C
Replaces 37-7022B
1023
www.white-rodgers.com
www.emersonclimate.com
Index Page
Installation 2
Wiring Diagram 3
Thermostat Quick Reference 4
Installer Configuration Menu 5
Operation 6
Programming 7
Troubleshooting 9
THERMOSTAT APPLICATION GUIDE
Thermostat
Configuration
Options
Thermostat
Applications
Maximum
Stages
Heat/Cool
Heat Pump
Single Stage
Compressor
Single Stage Compressor
Heat Pump Systems – 1
Stage Aux/Emergency Heat
2/1

Questions and Answers

  • R
    rconradAug 14, 2025
    How to troubleshoot no heat, no cool, or no fan on my White Rodgers 1F82-0261?
    • J
      Jesus ClarkAug 14, 2025
      If your White Rodgers Thermostat displays no heat, no cool, or no fan, check the following: * Replace any blown fuses or reset tripped circuit breakers. * Ensure the furnace power switch is turned ON. * Make sure the furnace blower compartment door or panel is correctly installed to engage the safety interlock or door switch.
  • A
    Amy PatelAug 17, 2025
    How to calibrate the thermometer on my White Rodgers Thermostat?
    • R
      Ryan MendozaAug 17, 2025
      To correct the temperature display on your White Rodgers Thermostat, adjust the thermometer setting within the Configuration Menu (item 8). You can adjust it by +/-4 degrees.
  • M
    Martin HollandAug 20, 2025
    Why is there no heat coming from my White Rodgers 1F82-0261 Thermostat?
    • S
      shawtimothyAug 21, 2025
      If your White Rodgers Thermostat is not producing heat, make sure the System Switch is set to Heat and the setpoint is higher than the room temperature. Check that the thermostat and system wires are securely attached. If the thermostat still doesn't click after being reset, contact a heating and cooling service person or the place of purchase for a replacement.
  • W
    William WilliamsAug 25, 2025
    What to do if my White Rodgers Thermostat is not cooling?
    • J
      James CastanedaAug 25, 2025
      If your White Rodgers Thermostat isn't cooling, ensure the System Switch is set to Cool and the setpoint is below the room temperature. Verify that all thermostat and system wires are securely attached. Note that there may be a delay of up to five minutes before the thermostat engages cooling if the compressor lock-out option is selected in the configuration menu (Item 6).
  • C
    Cathy YoungAug 27, 2025
    Why does my White Rodgers 1F82-0261 Thermostat not follow the set program?
    • V
      vmooneyAug 27, 2025
      To resolve a White Rodgers Thermostat that isn't following the program, check that the AM or PM settings are correct, both in the current clock and within the program settings for each time period. If a voltage spike or static discharge occurs, use the Reset Operation.
  • H
    hillandrewAug 31, 2025
    What causes a blank display on my White Rodgers Thermostat?
    • E
      Elizabeth ArroyoAug 31, 2025
      If your White Rodgers Thermostat display is blank or the keypad is unresponsive, it may be due to a voltage spike or static discharge. Use the Reset Operation to resolve this.
  • C
    carolnewmanSep 3, 2025
    What to do if the heat, cool, or fan runs constantly on my White Rodgers 1F82-0261 Thermostat?
    • D
      Daniel LewisSep 3, 2025
      If your Heat, Cool, or Fan runs constantly on your White Rodgers Thermostat, first check for shorts in the wiring by ensuring no wires are shorted or touching. Then, try resetting the thermostat. If the issue continues, consult your system's manufacturer or a service person for guidance on testing the Heat/Cool/Fan system. If the system then operates correctly, replace the thermostat. Also, check that the Fan Switch is not set to Fan On.
  • R
    rebeccaramirezSep 7, 2025
    How to adjust furnace cycle rate on White Rodgers 1F82-0261?
    • C
      charles36Sep 7, 2025
      If your furnace cycles too fast or too slow with your White Rodgers Thermostat, the location of the thermostat or the size of the heating system may be influencing the cycle rate. Adjust the cycle rate using Item 4 in the Configuration Menu.
  • J
    Jeffrey SmithSep 10, 2025
    How to adjust cooling cycle rate on White Rodgers 1F82-0261 Thermostat?
    • A
      Amanda HoganSep 10, 2025
      The cooling cycle rate for White Rodgers Thermostats is fixed and cannot be adjusted. The location of the thermostat or the size of the cooling system may be influencing the cycle rate.

Summary

White Rodgers Thermostat: Overview and Applications

Safety Precautions and Warnings

Outlines critical safety instructions for handling and installation to prevent injury or damage.

Thermostat Installation: Preparation and Mounting

Removing Old Thermostat

Step-by-step instructions to safely disconnect and remove the previous thermostat unit.

Thermostat Installation: System Configuration

Wiring Diagram: Single Transformer Systems

Visual guide for connecting thermostat wires to system components for single transformer setups.

Installer Configuration Menu

Configuration Options: Settings 1-6

Details settings for Cool Savings, EMR, Cycle Rate, Lockout, and Display Light options.

Configuration Options: Settings 7-11

Covers temperature display adjustment, units, fast second stage, and filter reminder settings.

Thermostat Programming Basics

Entering Program Schedules: Time and Day

Steps to set current time, day, and program periods for scheduling.

Thermostat Programming: Schedules

Enter Heating Program Schedule

Step-by-step guide to program heating periods for weekdays, Saturday, and Sunday.

Enter Cooling Program Schedule

Guide to program cooling periods, mirroring the heating setup process.

Troubleshooting and Reset Procedures

Common Troubleshooting Symptoms and Causes

Lists common problems (No Heat, No Cool, etc.) with possible causes and corrective actions.

White Rodgers 1F82-0261 Specifications

General IconGeneral
BrandWhite Rodgers
Model1F82-0261
CategoryThermostat
LanguageEnglish

Related product manuals