White Rodgers UNP310 - Checking Thermostat Operation; Turn On Power and Test Fan Operation

21
4.6 Turn on power
Turn on your power at the source.
Congratulations!You’vecompletedthethermostatinstallationprocess.
5. CHECK THERMOSTAT OPERATION
5.1 Fan operation
If your system does nothaveaG terminal connection, skip to 5.2 Heating system.
1. PressthefanbuttontoselecttheOn position. The blower should operate.
2. PressthefanbuttontoselecttheAuto position. The blower should stop immediately.