White Rodgers UNP310 - Test Cooling System; Using Your Thermostat; User Menu Navigation

23
5.4 Cooling system
1. PressthesystembuttontoselecttheCool position.
2. Press toadjustthermostatsetting1°belowroomtemperature.Theblowershouldcomeonimmediatelyon
high speed, followed by cold air circulation. The thermostat will indicate Cool On. There can be up to a 5 minute
delay.(seeINSTALLERMENU,item50)
3. Press toadjustthermostatsettingto1°aboveroomtemperature.Thecoolingsystemshouldstopoperating
and the Cool On icon will disappear.
6. USING YOUR THERMOSTAT
6.1 User menu
To customize thermostat settings, press the Menubuttonfromthehomescreen.Usethe or buttons to
highlight Settings and press Next.UseNext and Backtonavigatethroughmenuitems.Press or to change
the setting.