White Rodgers UNP310 - Thermostat Reset Procedure

31
Resetting the Thermostat or Thermostat Settings
If the thermostat has good batteries, but has a blank display or does not respond to key presses, the thermostat
shouldberesetbyremovingthebatteriesfor2minutes.Thisresetwillnotchangethemenusettingsorprogram.
If the condition persists after reinstalling the batteries, replace the thermostat.
Toconvenientlyresetonlythescheduleandusersettingsbacktofactorydefaults,pressMenu and Backlight
buttons at the same time and hold until the display goes blank and resets.