White Rodgers UNP310 - Test Heating System; Test Auxiliary Heat System

22
5.2 Heating system
1. PresstheSystembuttontoselecttheHeatposition.
2. Press toadjustthermostatsettingto1°aboveroomtemperature.Theheatingsystemshouldbeginto
operate and the thermostat will indicate Heat On.
3. Forheatpumpwithauxiliary-Press toadjustthermostatsettingto3°aboveroomtemperature.Theauxiliary
heat should begin to operate and the thermostat will indicate Heat On Aux.
4. Press to adjust thermostat setting below room temperature. The heating system should stop operating and
the Heat On icon will disappear.
5.3 Auxiliary only mode (heat pump systems)
1. PressthesystembuttontoselecttheAux position. This bypasses the heat pump and runs auxiliary heat only.
2. Press toadjustthermostatsettingtoaboveroomtemperature.Theauxiliaryheatingsystemshouldbeginto
operate and the thermostat will indicate Heat On Aux.
3. Press to adjust thermostat setting below room temperature. The auxiliary heating system should stop
operating and the Heat On Aux icon will disappear.