Whyte KYNAMIC - System Control; Kynamic System Hardware

04 SYSTEM CONTROL 4.1 Hardware
18
Whyte & Kynamic
Thank you for choosing the new Kynamic powered Whyte bike. The illustration above depicts the key Kynamic components
equipped with your eBike. Please note the products and specications stated in this manual may be updated without prior
notication. This manual includes instructions for the Kynamic KY-BC250 System, including the following components; Rear Hub
Motor - Intube Battery Set - Torque Sensor - HMI (mounted) - HMI (integrated) - Battery Charger.
Rear Hub Motor Torque Sensor
(Dual Side)
Torque Sensor
(Single Side)
Charging Socket
Battery HMI (Bar Mount)
HMI (Integrated) Charger