23
05 HMI BAR MOUNT
5.3 Data Clearance & Assist Modes
Assist Level Switch
In the normal operation, short press Up / Down button (4/5) to switch
increase and decrease assist level.
4
5
Light Function
If the eBike is equipped with a front or rear light, from the home screen press
and hold the Up (4) button for 3 seconds to turn them on. A light icon on the
top-right corner of screen will appear when the light is on. To turn the lights
off, repeat the operation holding the Up (4) button for 3 seconds. The light
icon in the top right will disappear from HMI screen.
To Next Page
Loading...
