34
07 CHARGING
7.2 Charging Instructions
Charge Port Location
Your Whyte eBike’s charge port can be located
where the seat-tube meets the down-tube. The
charge port is sealed by a rubber cover. For access
use the raised nger tab to lift the rubber cover.
Once the cover has been exed out of the way
the charger can now be inserted into the socket.
Charge port location may vary between eBike
models, please check your owners manual for
specic model details.
CAUTION - Always make sure whilst riding or
performing cleaning/maintenance that the
rubber cover is closed fully. The cover must be
correctly inserted into the socket to ensure a
tight seal is made.
To Next Page
Loading...
