Kunststoffschweißtechnik
Safety rules Chapter 2
10.12.2013 Working instructions WIDOS PSM 20 Page 12 of 31
2.8.3. Danger of crushing between and near the clamping beams
You can crush, grip or squeeze your fingers.
When open the clamping beams swivel in piston rod up to stop and after it
deposit the beam.
While closing the clamping beams do not put parts of your body between
beams and sheet.
While the tables are driving together do not put parts of your body between
beams and sheets.
2.9. Structural modifications on the machine
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In case of disrespect the warranty or liability will expire.
Machine parts which are not in a perfect condition are to be immediately replaced.
Only use original WIDOS spare and wear parts.
In case of purchase orders please always indicate the machine number!
2.10. Cleaning of the machine
The materials you use for cleaning the machine have to be properly treated and have to be
appropriately disposed, especially:
when cleaning with solvents
when greasing with oil and grease.
2.11. Warranty and liability
Our „General Sales and Delivery Conditions“ are principally valid.
They are at the owner's disposal at the latest when signing the contract.
Warranty and liability demands referring to damages of persons or objects are suspended if
they are caused by one or several of the following reasons:
not using the machine according to the prescriptions
improper transport, building-up, starting and operating the machine and maintenance
ignoring the information given in this manual
structural changes at the machine without permission
unsatisfactory checking of machine parts which are worn out
repairs performed in an inexpert way
catastrophes by external influence and Acts of God.
To Next Page
Loading...
