All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
4.0. Attachment to tractor
4.2. Adjusting the drawbar
Fasten the bottom drawbar at
the height of the bottom tow
bar.
Always use all 4 screws for
fastening each drawbar.
Fasten the drawbar to the
tractor and secure it.
Swivel the support upwards
and check whether the hitched
machine stands up straight.
Check whether the drawbar
fits the tractor if you
change the tractor. Adjust
the height of the drawbar if
necessary.
4.3. Connecting the hydraulics
Fix the hydraulic lines for
connection to the tractor to
the fastening clips (A) of the
drawbar.
The hydraulics are connected at
the hydraulic sockets located
at the rear of the tractor.
For tractors that do not have
this equipment, please contact
your dealer.
To Next Page
Loading...