All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
8.0. Service
8.2. Lubricating greases
Select a lubricating grease
suitable for the outside
temperature expected until the
next maintenance.
We recommend the following
lubricating greases:
SAE high pressure multipurpose
grease with 3-5% molybdenum
disulphide
8.3. Maintenance and inspection list
Machine in general
Clean the machine after use
to ensure faultless
functioning during the next
operation
Clean the machine thoroughly
and apply anticorrosion
protection by spraying with
oil
Yearly, at
the end of
the mowing
season
Carry out yearly inspections
Yearly,
before the
start of the
mowing season
Lifting and
tilting mechanism
for ground-level
and elevated
emptying
No maintenance as plastic
plain bearings are used
Screen surfaces
in catcher and
hopper
To Next Page
