All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
7.0. Service
7.5. Cleaning the blow-out openings
Unscrew the star screws on the
back safety cover (A).
Lift the safety cover (A) up to
the stop.
Clean all screen surfaces.
ATTENTION:
Always clean the machine
with a cloth or water –
never with your bare hands.
- RISK OF INJURY !
NOTE
Only clean grid plates allow
the machine to be filled to
full capacity and permit proper
The front safety cover (B) can
be removed for easier cleaning
of the hopper screen.
Unscrew the star screws on both
sides.
Slide the safety cover (B)
forward and lift.
After cleaning replace all
safety covers or move them to
working position and lock.
To Next Page
Loading...
