Installation
Before Installation
3 |
Make sure that the electrical and/or gas installation is correct. If this is not the case, call a certified
electrician and installer for the required operations.
Site preparation and electrical and gas installation for the product are the responsibility of the customer.
The product must be connected in accordance with local gas and electrical regulations.
Before installing the product, check whether it has any visible defects. If so, do not install it. Damaged
products pose a risk to your safety.
Product must be installed by a competent person.
To ensure that all air openings under the appliance remain unobstructed, this appliance must be placed on
a hard surface so that the feet do not sink into carpet or soft floor coverings.
The air for combustion is taken from the room air and the exhaust gases are excluded directly into the
room.
Good room ventilation is essential for the safe operation of the appliance. If no window or door is available
for room ventilation, additional ventilation must be installed.
The surface area of the kitchen is greater than 8 m2. The volume of the kitchen is greater than 20 m3.
The height of the kitchen is at least 1.80 m from the floor and the ventilation size is 150 mm.
Provide a minimum distance of 750 mm above the cooking surface.
To Next Page
Loading...