figure 7
NG (natural gas) connection
Final check
Disposal of old product
Destruction packing material
Moving instructions
Disposal of the old product
Natural gas connection of your product is ½". If you wish to convert your equipment from natural gas to LPG,
request assistance from the nearest service point.
1- Connect the cable, check that the house fuse is on.
2- Check electrical functions
Turn on the tap and use very foamy soapy water to check for gas leaks on the connection you have made. Never
control the paintwork with a flame.
The packaging materials may be dangerous for children. Keep the packaging materials
out of the reach of children. Dispose of all parts of the packaging material in accordance with environmental
standards.
Keep the original packaging of the product and move the product in the original one packaging. Follow the
instructions on the box. If the original box is not available, wrap it with blister packing material or thick
cardboard and tape it securely.
To prevent damage to the inside of the rack and the container in the oven the oven door, place a strip on the
inside of the oven door so that it lines up with these drawers.
Tape the caps and tray securely in place.
Do not use the door handle when transporting the oven.
Dispose of the old product so that it does not harm the environment. This product has a symbol
(WEEE), which indicates that electrical and electronic equipment must be collected separately. In
other words, it means that in order to recycle this equipment it must comply with the European
Directive 2002/96/EC. For more information, please contact the relevant local and regional
authorities.
Electronic products that are not subject to a controlled waste collection process pose potential
risks both to the environment and human health as they contain harmful substances.
You can refer to your dealer or waste collection of your municipality for disposal of the product.
Always cut the plug and break the door lock, if applicable, so that children are not exposed to
danger
Leakage control
Never check the paintwork with an open flame.
Do not place objects on the product. The product must be moved upright.
Checking the overall view of the product for any damage that may occur during transportation.
To Next Page
Loading...