To return to 24 hour format, press and hold (+) key for 3 seconds.
Note: Default format is 24 hours a day. In case of power failure set time it will return to factory setting..
1. Cooking time is set by turning on the timer.
2. Place the food in the oven.
3. Select the operating mode and temperature; See. Using the electric oven.
The oven will heat up to the temperature you set and maintain it temperature until the end of the cooking duration
you selected.
When the cooking time is over, the timer button turns counterclockwise. The alarm indicates that the power has
been turned off.
To use the oven you must also set the time when selecting the cooking mode and the temperature you
want. Otherwise, the oven will not work.
The lowest level of the oven is the 1st shelf.
The specified values have been determined in the laboratory
environment. These values may differ for your taste.
Switch the oven on using the function knob and temperature knob.
If you do not want to use the timer function, turn the knob counterclockwise to manual mode.
symbol.
This setting allows you to change the audio volume.
Adjust the audio volume by pressing and holding the (-) button.1.
Then select the volume by releasing and pressing (-) again (3 levels)2.
Now your alarm is set to your liking.3.
Note: Standard format is the highest level. In case of extended power outage your volume setting will return
to factory setting
ALARM VOLUME SETTING
Start of cooking process
Cooking table
Turn off the oven earlier than the selected time.
Turn the timer setting knob counterclockwise to the stop point.
To Next Page
Loading...