WIIM AMP USER MANUAL VERSION 1.0 10/29/23
17 | P a g e
● Wi-Fi OR ETHERNET SETUP
● Power on WiiM Amp and wait 30 seconds until it fully boots up.
● Open the WiiM Home App.
● Click on the device you want to configure.
● Select the network and enter the correct network password. (Ethernet
doesn’t have this step)
If you use an iOS system, you can also use Apple Wireless Accessary
Configuration (WAC) protocol or Home App to set up the device.
● SETUP with Apple WAC
● Power on WiiM Amp and wait 30 seconds until it fully boots up.
● Open iPhone settings and tap your selected device’s name on the WAC
setup section
● SETUP with Apple Home App
● Tap the Home app located on the home screen of the iOS device.
● Tap the "+" button located at the top-right corner of the screen.
● Tap “Add Accessory.”
● Tap “Don’t Have a Code or Can’t Scan?”
● Tap your selected device, which MUST be listed under “Nearby
Accessories.”
FILL YOUR HOME WITH SOUND
Immerse yourself in your favorite music and radio stations through seamless Wi-Fi or
To Next Page
Loading...