WIIM AMP USER MANUAL VERSION 1.0 10/29/23
15 | P a g e
Steps to set up the WiiM Amp with the optical or HDMI IN are the same as Line-in, replacing
Line-in with Optical IN or HDMI.
Notes:
• You can also enable “Autosense” on the WiiM Amp to automatically play your Line-
In or Optical-In source when WiiM Amp detects a signal. You can enable this
feature from the WiiM Home App.
• WiiM Amp has a built-in EQ to process the audio input based on your taste. You
can also control the audio volume in the App remotely without adjusting your audio
input.
• Some source devices may require a preamp. For example, some turntables do not
have a preamp built-in, so you will need to connect your turntable to an external
preamp and then connect the preamp to WiiM Amp.
CONNECT WIIM AMP’S SPEAKER OUT PORT
To Next Page
Loading...