WIKA CPG1500 - Page 60

60 WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
8. Maintenance, cleaning ... / 9. Dismounting, return ...
The calibration label is attached at the side of CPG1500. For instruments with protective
case cap, it is located at the top beneath the protective cap.
Examples shown:
Fig. 3 - CPG1500 with
protective case cap
Fig. 4 - CPG1500 without
protective case cap
9. Dismounting, return and disposal
Personnel: Skilled personnel
Protective equipment: Protective gloves, safety goggles
Tools: SW 27 open-ended spanner or torque wrench
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), there is a danger of physical injuries and damage to property
and the environment.
Should a failure occur, hazardous media under high pressure or vacuum
may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶
Wear the requisite protective equipment.