WIKA CPH6400 - Page 20

20 WIKA operating instructions, model CPH6400
11313439.04 12/2012 GB/D
GB
4. Design and function
TARE function
on/o
Change units
(bar, mbar, kPa, psi,
mmHg, inHg, kg/cm²)
Measuring mode
with MIN and MAX function
Measuring mode
with display of the measuring
rate and temperature in °C
1)
Measuring mode
with display of the measuring
rate and temperature in °F
1)
Info screen
Standard
measuring mode
Special functions of
the upper keys
Backlight
(on/o)
MODE = on
UNIT = o
USB-Interface
(on/o)
MODE = on
UNIT = o
Data logger
(Pressure and/or tem-
perature
2)
)
MODE = pressure
UNIT = tempera-
ture
Data logger
(start/break/stop)
MODE = start
TARE = pause
UNIT = Stop
Measured value
resolution
(+/-)
MODE = +
UNIT = -
Permanent zero
adjustment
TARE = corr.
Measuring mode
Instrument
on/o
= press button
1) Display of temperature only possible with temperature sensor connected (2-channel version)
2)
Storage of temperature values only possible with temperature sensor connected (2-channel version)
"ring-shift"
"ring-shift"
"ring-shift"
4.6.2 Keypad